Safety

Important Information

Tyres are the only part of your motorcycle which are in contact with the road. Safety in acceleration, braking, steering and cornering all depend on a relatively small area of road contact. It is therefore of paramount importance that tyres should be maintained in good condition at all times, and that, when the time comes to change them, suitable replacements are professionally fitted.

It is essential that you refer to your machine manufacturer’s handbook when buying and fitting replacement tyres. Changes in tyre size, type and construction should not be made without first seeking advice from the machine or tyre manufacturer, since fitting the wrong tyre may have an adverse effect on handling, safety and wear.

Avon motorcycle tyres are only for use on vehicles for which motorcycle tyres were originally specified by the vehicle manufacturer, any other use may be dangerous.

Motorcycle tyres which have been subject to use on rolling roads must no longer be used for subsequent, normal service. Use of Avon motorcycle tyres on a rolling road (Dyno) will invalidate the tyre warranty. All tests on rolling roads must be carried out with test tyres, special tyres reserved for maintenance purposes, or tyres which are worn out or downgraded.

For fitment recommendations please see Cooper Tire UK Motorcycle Fitment Chart or consult Cooper Tire Customer Service Division. All speeds stated in this brochure are subject to observance of the appropriate national speed limits.

Running in tyres

When new motorcycle tyres are fitted for the road, they should not be subjected to maximum power until a reasonable 'running in' distance has been covered. 100 dry miles (160km) is the recommended minimum (discount any wet miles covered).

Tyres should then be visually examined and their inflation pressure re-checked before riding.